Filter
Top Products
Page 10 Copyright © 2006 Proxim Wireless
Step 3: Mount Unit to Pole
Mount the 5012-SUR to a pole as follows:
Using a screwdriver, turn the screw on the band clamp counter-clockwise
until the clamp opens.
Place the back of the 5012-SUR against the pole such that the pole ts into
the curved portion of the unit.
With the 5012-SUR aimed in the direction of the BSU, slide the at end of
the band clamp around the pole and through the top opening in the 5012-
SUR unit, threading the at end of the band clamp into the metal catch at
the other end.
Using a 5/16” nutdriver or a screwdriver, turn the screw on the band clamp
clockwise until it is tight enough to hold the unit in place
Note:
Do not fully tighten band clamps; you must rst ensure a functional link to
the BSU (see Step 4: View LEDs/Adjust Mounting).
1.
2.
3.
4.