Filter
Top Products
6
Figure 2
Attachment of the RangeLAN2 Ethernet Adapter Antenna
2. Each RangeLAN2 792x Ethernet Adapter is
preconfigured to use Domain 0. If the existing wireless
network is not using Domain 0, use the Domain rotary
switch on the underside of the RangeLAN2 Ethernet
Adapter to set the Domain number to a value between
0 and 9. If the existing network is using a Domain
number between 10 and 15, you must set the Domain
number within the software configuration menu. See
Chapter 5 for information on how to access the Ethernet
Adapter’s configuration menu.