Filter
Top Products
4–2 • User’s Guide
Chapter 4 • Maintenance
General
Maintenance
Replacing the Lamp
1. Turn off the projector.
2. Unplug the projector’s power cord from the wall socket and
remove the power cord from the projector’s power receptacle.
3. Unscrew the screw located on the right side of the rear panel
and remove the service door.
Figure 4-1
Removing the service door
4. Unscrew the two service door retaining screws (they will not
come out of the service door).
Figure 4-2
Unscrewing the service door retaining screws