Filter
Top Products
Quick Start Guide
AirborneDirect™ Industrial Serial Device Server
ABDG-SE-IN5410/IN5420
Revision v2.1
February 2011
Document Number: 100-8106-210
Kit Contents:
Upon receiving the kit please check that you received the following:
ABDG-SE-IN5410 or ABDG-SE-IN5420 Unit
2dBi, 2.4Ghz 50 ohm, omni-directional antenna
Quick Start Guide
5 VDC power supply (optional, included only if ordered as an accessory)
Airborne Direct software and documentation CD
If any of the above contents are missing or appear damaged please contact Quatech Sales support directly at (800) 553-1170 or
support@quatech.com.
What you will need:
To evaluate the unit you will need the following components and facilities:
ABDG-ET-IN50X0 unit with included antenna attached.
Laptop or desktop system with an Ethernet port.
5-36 VDC power for terminal block attachment, or an AC power outlet for optional ABDG-SE-IN5410/IN5420 power supply.
802.11b/g network for testing the unit, either AdHoc or Infrastructure (Access Points) mode. The test network configuration must be
known. Required information will include:
o SSID (Wireless network name).
o Security settings (WEP, WPA, WPA2, etc.).
o Security credentials (passphrase, key or certificates).
o Static IP address, Subnet Mask and Gateway address if static IP addresses are used on the test network.
A web browser on the laptop top or desktop (MS Explorer, Firefox, Opera and Chrome v4.0 are supported).
CAT5 Ethernet cable for connecting the Airborne™ device to the laptop or desktop.
Serial cable to connect Airborne™ device to host system.