QVS VA-EXR Network Card User Manual


 
Audio & Video
Multi-Port Active
CAT5e/6 Ext. Kit
U
SER MANUAL
Read this manual thoroughly, and follow the installation and
operation procedures carefully to prevent any damage to the unit,
and/or any of the devices connected to it.
VA-EXK Starter Kit:
(1) 4-Port Transmitter Module
(1) Receiver/Repeater Module
(2) DC 12v 1.2A Universal Power Adaptor
User Manual
VA-EXR RX Expansion Module:
(1) Receiver/Repeater Module
(1) DC 12v 1.2A Universal Power Adaptor
User Manual
[S
OLID CAT5E IS REQUIRED. CAT6 IS RECOMMENDED]
O
VERVIEW
Broadcast audio & video to multiple locations simultaneously
using AV Multi-Port Active CAT5e/6 Distribution Amplifier
(D/A) Extender Kit. Its built-in video extender ensures clear and
sharp images as far as 1,000ft away from your CPU. Use it to
enhance your presentations as well as broadcasting of real-time
data. It is ideal for classrooms and training facilities, remote
security monitoring and digital signage applications. To ensure
the best video integrity, it has a 150MHz video bandwidth that
supports resolution of up to 1600x1200 @ 60Hz.
In addition, the D/A Extender Kit can be daisy chained up to
three levels to connect as many as 17 monitors and speakers,
making it an excellent solution for public broadcast systems.
F
EATURES
Economical A/V extender in wall mountable modules
Provides pass-thru port for local monitor and speaker
TX also provides 4 expansion port
RX has built-in 2-Port D/A and daisy chain port
RX provides equalization and gain control
Works with flat panels, projectors and HDTV’s
Connect large monitors with HD15 input port
Supports VGA/UXGA up to 1600x1200 @ 60Hz
Cascade capability provides for future expansion
Compact design with shielded metal casing
One Year Limited Warranty
Note:
1. If you connect a DDC type monitor to Video-Out Port 1, all
other monitors must be able to support the highest resolution
of that DDC monitor.
2. This designed for VGA/UXGA, and Multisync monitors. It is
not suitable for CGA, EGA, or MONO-type monitors, or
those that use digital video signals like DVI-D or DFP.
3. For maximum performance, install it away from devices that
produce high heat or electrical noise. Keep well ventilated.
R
ECOMMENDED CABLES
CC388MA Series - an HD15M/M triple shielded high quality
video cable with audio to connect your computer to distribution
amplifier/extender. It is available in standard lengths of 3, 6, 10,
15, 25, 35 & 50ft. (Must be purchase separately.)
SPECIFICATIONS
Function Specification
Cable Distance
(D/A to Display)
1,000ft max.
Max Resolution 1600x1200 60Hz
Max Bandwidth 150 MHz
Signal Type VGA/UXGA, Multisync
Horizontal Frequency 30 – 110KHz
Vertical Frequency 56 – 85Hz
Operating Temperature 5 – 40
o
C
Storage Temperature -20 – 60
o
C
Humidity 0 – 80% RH, Non-condensing
Housing Metal
I
NSTALLATION
1. Use a high density HD15 male/male video and 3.5mm audio
cable (CC388MA) to connect the PC’s audio & video port to
the Audio-In and Video-In port of the distribution amplifier.
2. Use a high density HD15 male/male video and 3.5mm audio
cable (CC388MA) to connect the display and speaker to
receiver’s Audio-Out and Video-Out ports.
3. Connect the TX module to the RX module using a solid
CAT5e or CAT6 cable with T568B wiring termination.
4. Plug the power adaptors into an AC source
5. Turn on the monitors and the PC.
6. Adjust Gain (brightness) and EQ (cable equalization) as
needed.
D
ISTANCE RESOLUTION MATRIX
Please use the listed resolution matrix as a guide for setting the
monitors. Some results may vary depending on the frequency,
type and size of displays.
Up to 1600 x 1200 @ 60Hz Up to 330ft
Up to 1280 x 1024 @ 60Hz Up to 395ft
Up to 1024 x 768 @ 60Hz Up to 590ft
Up to 800 x 600 @ 60Hz Up to 660ft
Up to 640 x 480 @ 60Hz Up to 1,000ft
D
AISY CHAINING
Connect additional RX modules to an existing RX module’s
CAT5 loop-out port. You can expand up to 3 levels.
For additional technical support,
send an email to: support@qvs.com.