Radio Shack 20-197 Scanner User Manual


 
38
Organizing Objects
39
Organizing Objects
Organizing Objects
Object Numbering
Your PRO-197 is different from other types of scanners in how
it stores your Scannable Objects in memory. Instead of fixed
channels and banks, objects are stored in the first available block
of free memory and an Object ID is assigned. The Object ID is the
“address” where the object is stored in memory.
The Object ID and the current Scan List number are displayed
whenever an object is selected in Manual Mode and Program Mode.
The Object ID is also displayed when the scanner stops on an active
object while scanning.
10-0348 CONV pID
FM 155.95000
FIRE
CT:127.3
Object ID
Scan List
For example: 10-0348 means Object ID 0348 is mapped to Scan
List 10.
To directly access an object using Object ID:
1. Press
MAN or PROG to enter Manual Mode or Program Mode.
2. Use the number keys to enter the Object ID, then press ENT.
Note: Objects are not really “in” a Scan List. Objects are “mapped”
to Scan Lists, meaning that an object can be a member of one or
more Scan Lists. Using the p or q keys to scroll up or down while
viewing a Scan List, will show all the other objects mapped to that
list.
Grouping Objects with Scan Lists
By default, new objects are automatically assigned to Scan List 01.
You can divide these objects into separate Scan Lists so that you can
easily enable or disable groups of objects depending on what you
want to scan.
The number of objects that can be grouped in a Scan List is limited
only by the scanner’s memory, and single objects can be members of
multiple Scan Lists.
There are 20 regular Scan Lists available, a special “FAV” Scan List
for one-button access to your favorite Scannable Objects, and a
Skywarn Scan List.
You can also mix and match different object types in Scan Lists as
you see fit. There are no limitations as to the type of objects that can
exist together in the same Scan List.
How you group objects in Scan Lists is entirely up to you. Here are
some examples of how objects can be grouped:
Geographically: You may wish to group your Scannable Objects
according to the areas where they are used. This may be useful if you
use your scanner while traveling.
By trunking system: It is possible to assign any combination of
object types to any Scan List. However, you may wish to assign TGRP
objects associated with specific trunked radio systems to specific
Scan Lists, so you can easily enable or disable monitoring of each
system by enabling or disabling the associated Scan List.
By object type: It may be desirable to segregate object types by
assigning them to specific Scan Lists. For example, if you assign a
group of LMIT or SRVC searches to a single Scan List, you can easily
activate or deactivate searching on those objects by enabling or
disabling the associated Scan List.