Filter
Top Products
66
Weather Scanning
67
Weather Scanning
Your scanner also has a SAME wildcard feature, which allows you to
set the radio to alarm on partial matches of the location code.
To enter SAME Location and Event Codes
1. Press
WX to enter Weather mode.
2. Press the SAME softkey to add or edit SAME entries.
3. Press p or q to scroll to the desired SAME code entry.
4. Press SEL to edit the selected SAME entry.
5. With the Entry: field selected, press u to turn the entry on.
Note: When a SAME location/event code storage location is set
for Entry ON, the radio will process the SAME location and event
code that is stored there. When a storage location is set for Entry
OFF, that SAME location and event code will be ignored.
6. Scroll to Code: and press u to enter a SAME location code.
7. Press the number keys to enter a SAME code.
Note: The PRO-197 supports entry of Extended SAME codes,
which can include numbers and letters. The text entry mode is used
to enter both numerical SAME codes and extended SAME codes.
To enter a numerical SAME code, simply precede each number
in the SAME code with “1”. For example, to enter SAME code
048113, press 10 14 18 11 11 13.
8. Scroll to the Event: field. Note the current default of ***,
which will allow all messages for the specified SAME location
code. We recommend that you leave the event code with
*** to receive all alerts. A list of event codes can be found at
www.weather.gov.
9. Scroll to Tag: and press u.
10. Input a tag name that corresponds with the SAME location
code that you have entered. See “Appendix C: Text Entry andAppendix C: Text Entry and
QuickText” on page 115 for information on entering text.
11. Scroll to
Alarm:. You can specify different alarm sounds for this
SAME entry. We recommend that you use the default setting
here for general purpose weather alerting.
12. Scroll to Lockout:. Default is off. Lockout is a special purpose
parameter that can be used to lock out individual event or area
codes. We recommend that you leave Lockout set to off for
general purpose weather alerting.
13. When you have finished editing your SAME entry, press the Save
softkey to store the data.
14. Press the Save softkey again to save all SAME changes and
return to the Weather mode.
Note: When a SAME location/event code storage location is set
for Entry ON and Lockout ON, the radio will process the SAME
location/event code that is stored there, and will lock out the
specified event code. A SAME location/event code storage location
set for Entry: OFF and Lockout: ON will not be processed,
because Entry is set to OFF. In case of a conflict (i.e., two identical
codes and events are entered, and one is locked out), the locked out
entry will take precedence.
To reset SAME code to the default setting:
1. Press
WX.
2. Press SAME softkey.
3. Press p or q to select SAME code location.
4. Press SEL.
5. Press q to select code, then press Dflt softkey.
6. Press Save softkey to save the code.
7. Press Save softkey again to save changes.