Radio Shack 63-1037 Thermostat User Manual


 
©
2002 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are trademarks used by
RadioShack Corporation.
OWNER’S MANUAL —
Please read before using this equipment.
www.radioshack.com
63-1037
Thank you for purchasing the RadioShack
Wireless Pool/Spa Thermometer. Your
thermometer measures water temperature,
and is useful in swimming pools, hot tubs,
and freezers. It is for use with an in/out
thermometer (not supplied, available at your
local RadioShack store or online at
www.radioshack.com). The supplied wall
mount holder and stand let you mount it
wherever you like.
+056#..+0)"
$#66'4+'5
Your thermometer requires two AA batteries
(not supplied) for power. For the best
performance and longest life, we
recommend RadioShack alkaline
batteries.
R
RR
.
..
.
1. Remove the wall-mount holder from the
back of the thermometer.
2. Use a Phillips screwdriver to loosen the
screws on the battery compartment
cover and remove the cover.
3. Slide
CHANNEL 1/2/3
to the desired
setting, then press
RESET
. The selected
channel appears on the display.
4. Slide
°
°°
°
C/
°
°°
°
F
to the desired setting.
5. Place two batteries in the compartment
as indicated by the polarity symbols
(+ and –) marked inside.
6. Replace the cover and secure it with the
screws.
R
RR
12'4#6+10
Place the temperature sensor probe where
you want to test. The current temperature
and selected channel appear. Signals
transmit to the main unit about every 30
seconds.
±
±±
±
4'5'66+0)"6*'"5;56'/
If your thermometer stops working properly,
use a pointed object to press
RESET
. This
resets the temperature and reinitializes the
sensor transmitter.
/1706+0)
Place your thermometer on a flat surface
using the supplied stand, or mount it on the
wall using screws (not supplied) and the
supplied holder.
5'.'%6+0)"#".1%#6+10
Choose an indoor or outdoor location for
your thermometer that is within 60 – 90 feet
(20 – 30 meters) of the main unit.
±
±±
±
POOL SPA
WIRELESS THERMOMETER
Liquid Crystal Display — The
current temperature and selected
channel appear.
Temperature Sensor Probe — Place it in
water to test the temperature.
°C / °F — Select Centigrade (°C) or
Fahrenheit (°F) for your desired degree
format.
Wall Mount Holder — Use to mount
the thermometer on a wall.
Removeable Stand — Use to set
thermometer on a table or other flat surface.
Channel 1/2/3 — Slide to Channel 1, 2, or 3. Set
to a different channel than the other remote
sensors you are using.
y
yy
y — Appears if the batteries are weak.
.
"%#76+10"
.
Use only fresh batteries of the required size
and recommended type.
Do not mix old and new batteries, different
types of batteries (standard, alkaline, or
rechargeable), or rechargeable batteries of
different capacities.
If you do not plan to use the thermometer for
a month or more, remove the batteries.
Batteries can leak chemicals that can
destroy electronic parts.
°
C/
°
F
CHANNEL 1/2/3
RESET
Battery
Compartment
Cover
R
"9#40+0)"
R
Dispose of old batteries promptly and properly.
Do not burn or bury them.
±
"016'"
±
"
Operation
Do not set two or more thermometers to the
same channel when using them with one
main unit. Otherwise you will unable to judge
which thermometer the digits represent.
Your thermometer comes with a protective
film covering the display which should be
removed before use.
Selecting a Location
The construction of your home or office might
affect the transmission range between the
main unit and the thermometer. If you have a
choice of several locations, try each to see
which provides the best performance.
9KTGNGUU"2QQN15RC"6JGTOQOGVGT
#
"+/2146#06"
#
If an icon appears at the end of a paragraph, go to the box on that page with the corresponding icon
for pertinent information.
R
RR
— Warning
#
— Important
±
±±
±
— Note .
..
. — Caution
°
°°
°
— Hint