Filter
Top Products
18
19
Loading the Preset Race Frequency List
For your convenience, six car race frequencies are
preprogrammed. You can use one of these race
frequencies by loading it to the channel banks.
To load the race frequencies:
1. Press Menu.
2. Rotate the knob to select 1: Preset Race, then
press E
PGM.
3. Rotate the knob to select 1: Load Race, then
press E
PGM
.
4. Rotate the knob to select one of the races,
then press E
PGM
.
5. If you select races A, B or C, Load Bank X into
Bank 0 Yes=”1” / No=”3” appears.
If you select races D, E, or F, Load Bank X into
Bank 0 and 1 Yes=”1” / No=”3” appears.
6. Press 1 to program the race or press 3 to cancel.
Programming Driver Frequencies
To select the appropriate frequency for each
driver:
1. Press CAR, enter the car’s number, then press
E
PGM
.
2. If the car number is not stored, Car# XX is
not stored. Program new car? Yes = “E” / No = “.”
appears.
3. Press E
PGM
to edit the tag.
4. Enter the tag you want to assign to the car
number (such as driver’s name), then press
E
PGM
.
5. Enter the frequency of the car, then press
E
PGM
.
6. If you want to input another frequency to the
car, press E
PGM
.
Monitoring a Car
To monitor a car.
1. Press CAR, enter the car number, then press
E
PGM
.
Or
1. Select the car from a list. Press CAR then
press E
PGM
.
2. Rotating the knob to the desired car, then
press E
PGM
.
Select the Car’s Primary Frequency
Primary frequency is the frequency which is
selected first when a car has two or more
frequencies. By default, the frequency in the
smallest channel works as the primary frequency.
To change a car’s primary frequency:
1. Show the channel where the car number is
programmed.
2. Press the Func key and rotate the knob to
select the other frequency.
Primary frequency is also changed automatically
in the following situations:
• Selecting car channel by rotating the knob
during manual mode.
• Pressing SCAN when you monitor a car
channel found by scan mode.
Overwriting the Preset Race Frequency List
After programming your updates to a race, you
can overwrite the preprogrammed race frequency
with your changes.
1. Press Menu.
2. Rotate the knob to select 1: Preset Race, then
press E
PGM
.