Filter
Top Products
42
Organizing Objects
43
Organizing Objects
Scan List 11-20
Press FUNC, then press a number key, i.e., press FUNC 3 to toggle
the status of Scan List 13.
Note: If you enable a Scan List that has no assigned objects, the
number for that Scan List will flash in the display while the scanner is
scanning.
From Global Settings Menu
1. Press PROG to enter Program Mode.
2. Press GLOB softkey.
3. Press p or q to scroll to Scan Lists: and press SEL.
4. Press p or q to scroll to the Scan List you wish to change then
press SEL.
5. Press u to scroll to Enabled: and press t or u to select On or
Off.
The asterisk (*) indicates Scan List enabled.
6. Press the Save softkey to save settings.
7. Press Save softkey again to confirm global changes and exit
GLOB menu.
NS (Not Scanned) Scan List
If you accidently store an object with no Scan List mappings, the
object will be placed in a special “NS” Scan List.
To access NS scan List:
1. Press
PROG to enter Program Mode or press MAN to enter
Manual Mode.
2. Press t or u to scroll to the NS Scan List.
3. Press p or q to scroll through the NS objects.
4. Press
PROG.
5. Press EDIT softkey.
6. Press CURR softkey to view object menu.
7. Scroll down to Scan Lists:
8. Press u to scroll through the Scan Lists.
9. Press SEL to select On or Off the desired scan list item. The
asterisk (*) next to the Scan List number indicates that the object
is a member of that Scan List.
Favorite List
To add an object to Favorites:
In scan mode, Manual mode or Program mode, press FUNC, then
FAV.
Each scannable object menu also has a FAV option. Select YES to
add to Favorites.
When FAV is set to YES, the object is a member of the Favorites Scan
List in addition to any other Scan Lists that it is mapped to.
To activate FAV scan:
Press FAV and the radio suspends scanning of all objects in the radio
except for those that are in your Favorites list.
To clear FAV scan list:
1. Press
PROG to enter Program Mode.
2. Press the GLOB softkey.
3. Press p or q to scroll to Clear FAV:.
4. Press SEL to set FAV = NO for all objects.
5. Press YES softkey to confirm.
6. Press Save softkey.