Filter
Top Products
SH7211 Group
Data Transfer between On-chip RAM Areas with DMAC (Cycle-Stealing Mode)
REJ06B0732-0100/Rev.1.00 March 2008 Page 10 of 13
2.4.3 Direct Memory Access Controller (DMAC)
The settings of DMAC registers for the sample program are described in table 7.
Table 7 Settings of DMAC Registers
Register Name Address Setting Value Description
DMA source address
register 0 (SAR)
H’FFFE1000 H’FFF81000 Transfer source start address
DMA destination address
register 0 (DAR)
H’FFFE1004 H’FFF82000 Transfer destination start address
DMA transfer count
register 0 (DMATCR)
H’FFFE1008 D’128 DMA transfer count:
128 transfers
H’0000 0000 Before DMA initialization
DE = “B’0”: disables DMA transfer
H’8000 4410 DMA initialization
TC = “B’1”: transfers data for the count
specified in DMATCR for each transfer
request
DM[1:0] = “B’01”: increments the destination
address
SM[1:0] = “B’00”: fixes the source address
RS[3:0] = “B’0100”: auto request
TB = “B’0”: cycle-stealing mode
TS[1:0] = “B’10”: longword (4 bytes) unit
IE = “B’0”: disables interrupt requests
DE = “B’0”: disables DMA transfer
H’8000 4411 When enabling DMA transfer
DE = “B’1”: enables DMA transfer
DMA channel control
register 0 (CHCR)
H’FFFE100C
H’8000 4410 When disabling DMA transfer
DE = “B’0”: disables DMA transfer
DMA operation register
(DMAOR)
H’FFFE1200 H’0000 0001
DME = “B’1”: enables DMA transfer on all the
channels