5
Guide To Components
1.
Document Feeder (ADF)
The document feeder automatically feeds
a stack of originals one by one.
2.
Exposure glass
Place originals here face down for copy-
ing. ⇒ P.18 “Originals”
3.
Internal tray
Copied paper is delivered here face down.
4.
Main power switch
If the machine does not operate after turning
on the operation switch, check if the main
power switch is turned on. If it is off, turn it on.
5.
Main power indicator
This indicator light up when the main
power switch is turned on, and goes off
when the switch is turned off.
6.
On indicator
This indicator lights up when the opera-
tion switch is turned on, and goes off
when the switch is turned off.
7.
Operation switch
Press this switch to turn the power on (the On
indicator light up). To turn the power off, press
this switch again (the On indicator goes off).
8.
Control panel
⇒ P.9 “Control Panel”
9.
Remove Paper Indicator
The indicator is lit when paper is output
to the internal tray 2 (1 bin tray). When
paper is removed from the internal tray 2,
the indicator goes off.
Note
❒ Internal tray 2 (1 bin tray) is optional.
10.
Duplex unit (Unit for two-sided
copies)
Makes two-sided copies.
11.
Front cover
Open to access the inside of the machine.
12.
Paper tray
Set paper here.
13.
Paper tray unit (Option)
14.
Holding stand
AdonisC2_AEcopy110F_FM.book Page 5 Wednesday, October 3, 2001 1:43 PM