Filter
Top Products
IP-Fax Function
69
3
IP-Fax Function
The IP-Fax function sends/receives documents between two facsimiles directly
connected to a TCP/IP network.
IP-Fax uses SIP and H.323 as the network protocol.
Specify an IP address or host name instead of a fax number for sending. When
using a gate keeper, specify its alias telephone number. Specify addresses of the
gatekeeper or SIP server (proxy serer, registrar, redirect server) as appropriate
in “Setting IP-Fax” Facsimile Initial Settings. See p.150 “IP-Fax Settings”, Facsim-
ile Reference <Advanced Features> . You can also send to a G3 facsimile connected
to the public switched telephone network (PSTN) via a gateway (T.38-compli-
ant).
When using an SIP server, you can send by specifying SIP User Name.
You can also transmit to a G3 facsimile connected to the public switched tele-
phone network (PSTN) via a gateway (T.38-compliant).
Since your machine and the receiver’s machine are on the same network, no mail
server is necessary. You can communicate with the receiver directly. Transmis-
sion speed is higher than with the G3 network.
To cancel IP-Fax transmission, see p.23 “Canceling a Memory Transmission”.
JupterC2_Fax_EN-F_FM.book Page 69 Tuesday, November 30, 2004 2:47 PM