Filter
Top Products
Immediate Transmission
29
2
Immediate Transmission
Immediate Transmission is conve-
nient when:
• You wish to send a document im-
mediately as it is scanning.
• You wish to quickly check whether
you have successfully connected
with the other party's fax machine.
• Your machine's memory is getting
full.
The machine dials immediately after
you press the {
{{
{Start}
}}
} key. The mes-
sage is scanned and transmitted page
by page without being stored in
memory.
Note
❒ You can only specify one destina-
tion for Immediate Transmission.
❒ You can set whether the machine is
in Memory Transmission mode or
Immediate Transmission mode
right after the power is turned on
with the User Parameters.
❒ The machine does not redial with
immediate transmission.
A
AA
A
Check that the Memory Transmis-
sion indicator is not lit.
If it is lit, press the {
{{
{Memory Trans.}
}}
}
key.
B
BB
B
Set your original.
Reference
p.23 “Setting Originals”
C
CC
C
Select any scan settings you re-
quire. See p.32 “Scan Settings”.
D
DD
D
Dial.
If you make a mistake, press the
{
{{
{Clear/Stop}
}}
} key, and then enter the
correct number again.
Reference
p.34 “Dialing”
See p.19 “Chain Dial”, Advanced
Features.
E
EE
E
Press the {
{{
{Start}
}}
} key.
The machine calls the destination.
While it is dialing, the number or
name which is programmed as the
Own Name or Own Fax Number
in the machine of the other party is
shown on the display. When con-
nected, the machine starts scan-
ning the original.
StellaF15_EN_Combine_F1_Pre_FM.book Page 29 Friday, August 27, 2004 6:22 PM