Filter
Top Products
———
3. ACCESSORIES
3-3 Assembly
3-3-1 Install the thermal paper
1. Press the release button, and
open the top cover.
See Figure 1.
Figure 1
2. Remove the protective sheet of
paper from inside the machine.
See Figure 2.
3. Set the thermal paper in the
machine with the leading edge
feeding from the top of the
roll and to the rear of the
machine.
See Figure 3.
4.
Pull out the leading edge about
15 cm [6 inch ] and insert it under
the guide plate (which is labeled
in green) to the rear of the platen
roller.
See Figure 4.
Figure 2
~——- n “ ‘-–-–—
— -—
Figure
3
.—
I
————
Figure 4
5. Close the top cover.
A paper cycle is made automatically.
NOTE:
If there is no paper cycle, check that the roll is installed correctly.
Icmxml”