Ricoh Fax22 Fax Machine User Manual


 
10. TROUBLESHOOTING
10-2
*
Line Failure
If communication is not successful, the LCD will show an error code
and an error report will be printed.
The format of the Error Report is as follows:
***
Error Report ***
AUG 18 90 02:19 PM
********************************** ******************* *********************
********
MODE REMOTE TERMINALI.D.
START TIME
TIME
PAGES STATUS
————————————————————— .———————— ————— –———— .—————*
* TX
08/18 02:19 PM (X):06
**
Em5
****************** ***************** ***************** ****************** *********
10-3 Operating Difllculties
During Standby
En!Ezl
is not displayed.
–During Transmission
Transmission camot take
place.
.Switch the power on.
.The document is jammed in the
feeder. Remove thejam.med do-
cument (referto page 45) and repeat
the transmission procedure.
.The other machine is out of order
Check the error report.
Ask the other party to correct
the fault.
The line is busy or noisy.
Check that the dial tone is sent out.
Check if there is an error report.
Try to retransmit.
The telephone line type setting is
wrong. See page 31.
KO(M)KI”