Filter
Top Products
11. REFERENCE MATERIAL
11-2 Glossary
Most terms are
contents). This
explained on the pages where they occur (see the
glossary explains some terms
fullyin the text.
BPS (Bits Per Second):
This is the data communication rate. In G3
digitizes documents, transforming them into
that were not explained
mode, your fax terminal
bits (an average page will
produce about 320,000 of them), and then sends them out at a top speed
of 9,600 bps.
Communication:
Transmission or reception.
copy:
When used as a noun, this refers to a printout, either in copy mode or
receive mode.
CSI:
Called Subscriber Identification.
Document
This is the original page or set of pages
External Telephone:
This is the telephone that is connected
Group 3:
that you wish to send.
to the jack marked “Ans”.
This is the internationally-agreed signaling and data transfer method
(approved by CCITT) used for facsimile communication. Group 3 (also
known as G3) is a digital facsimile technique which sends a letter-sized
page in less than 1 minute.
Handset:
This is used specifically to refer to the built-in handset that is plugged
into the side of the machine, and not the external telephone (see above).
Line:
This is the telephone line, connected to your terminal at the comector
marked “Line”.
Immcl”
50