Filter
Top Products
SATA+ULTRA ATA RAID CONTROLLERRC212 User Manual
22
For Windows® 98SE/Me
＊
For New Installation
1. Setup the RAID array prior to Windows installation.
2. Follow Microsoft procedures to install Windows 98SE/Me accordingly.
3. Once Windows has installed and booted. Please insert the CD driver bound with
PCI SATA+PATA RAID card into your CD-ROM Drive.
4. At the Windows desktop, click Start, then Run.
5. Type D:\RC-212\Setup.exe, click OK. (Change D:\ to match your CD-ROM drive
letter)
6. Follow the on-screen instructions to complete the installation, and then restart your
system.
7. Once you have rebooted your computer. Windows® 98SE/Me will detect the PCI
SATA+PATA RAID card and find a VIA VT6421 RAID Controller device. When the
Add New Hardware Wizard asks What would you like to do?, select Specify the
location of driver (Advanced) and click Next button.
8. When the Add New Hardware asks for the driver installation, uncheck all the boxes
to allow Windows® 98SE/Me search its own driver database. Click Next to start the
search.
9. The Add New Hardware Wizard will find the driver for the device VIA VT6421 RAID
Controller. Click Next to continue.
10. When the driver installation is complete, click Finish.
11. Your computer must be restarted in order to complete the installation, click Yes to
restart your computer.