Filter
Top Products
SATA+ULTRA ATA RAID CONTROLLERRC212 User Manual
5
IDE/RAID: Jumper Settings
JP Description
1-2
close
Enable SATA Connector B
J8-J11
2-3
close
Enable SATA Connector C
1-2
close
Enable SATA Connector A
J12-J15
2-3
close
Enable SATA Connector D
Default Mode is all jumper 2-3 close, so C-D is active and A-B is inactive on default.
1.There are four SATA ports in RC212 RAID adapter. We named these ports character
A through D. Ports C to D are internal SATA ports and A to B are external SATA ports.
By changing the jumper setting (F and G) on RC212 that allows you to utilize 2 ports
of this card. With different jumper setting you can active port A, B, C and D .
Note: There are four SATA ports in PCI SATA+PATA RAID card. We named these ports