Filter
Top Products
Wireless Adapter RNX-EasyN1 User Manual
34
h Preamble: Select Auto from the drop-down list, unless you are aware of
the preamble type (long or short) used in each station.
h Ad-hoc wireless mode: Select a wireless mode from the drop-down
list depending on the type of stations used in the ad-hoc network.
Select B/G Mix if the network consists of 11b and 11g stations. Select
B-only or G-only if the network consists of only one type of wireless
mode.
h RTS Threshold: Place a check in this box if you would like to enable
RTS Threshold. Any packet in the RTS/CTS handshake larger than the
specified value (bytes) will be discarded.
h Fragment Threshold: Place a check in this box if you would like to
enable Fragment Threshold. Any packet larger than the specified value
(bytes) will be discarded.
h Click on the Apply button to save the changes.
Authentication and Security
The Security tab allows you to configure the authentication and encryption
settings such as: WEP, WPA-PSK, WPA2-PSK and 802.1x. Each security option
is described in detail below.
WEP Encryption
The WEP tab displays the WEP settings. Encryption is designed to make the
data transmission more secure. You may select 64 or 128-bit WEP (Wired
Equivalent Privacy) key to encrypt data (Default setting is Disable). WEP
encrypts each frame transmitted from the radio using one of the Keys from a
panel. When you use WEP to communicate with the other wireless clients, all
the wireless devices in this network must have the same encryption key or pass
phrase. The following information is included in this tab, as the image depicts
below.