Filter
Top Products
2U SERVER CHASSIS RSV-Z2600 User Manual
7
4. After installing the Motherboard, you can
follow by installing the Power Supply.
5. To Install Power Supply, you press the Power
Supply against the rear of the Chassis, and
fasten the screws on the four corners.
6. You can then connect all cables for the PSU
and Motherboard.
7. After lock the HDD on to the cage, You can
then install the cage onto the Chassis, from
Left to Right.
Note: You may want to adjust the cables so
they won’t interfere with the other connectors
on the board. Also due to the limitation on
height, RAM with heat sink may cause
issues.