Filter
Top Products
GS-5124C:
24-Port Unmanaged Gigabit Ethernet Switch
Key FeaturesKey Features
24-Port 10/100/1000 Mbps GbE Switch
Provides two Gigabit Ethernet Modules
options: 1000Mbps RJ-45/1000Mbps
Fiber SFP (single-mode/multi-mode) for
remote uplink Conforms to IEEE 802.3
10BASE-T, IEEE 802.3u 100BASE-TX,
IEEE 802.3ab 1000BASE-T and IEEE
802.3x flow control standards
Supports 10/100Mbps auto-detect half/
full duplex and 1000Mbps at full duplex
Supports TP interface auto MDI/MDI-X
function for auto TX/RX swap
Supports 802.3x flow control pause
packet for full duplex
LEDs to indicate: 10/100/1000Mbps, Link
/Act. and Power Status
Slim & Compact design
RoHS Compliance
Overview
GS-5124C is a cost-effective switch that
meets all IEEE 802.3/u/x/z Gigabit, Fast
Ethernet specifications. With 48 Gbps
switch fabric, the switch improves your
network performance. You can connect to
backbone or make Gigabit to the PC to
perform high speed transfer. The switch
has a 8K MAC Address Table and provides
a 400K on-chip buffer. It is suitable for
workgroups or WAN edge application. The
versatile and compact 1RU height design
of the GS-5124C enables the device to be
rackmounted in a standard 19 inch rack,
while conserving valuable rack space.
Easy Installation and Configuration
GS-5124C conforms to plug and play for
easy installation and use. With diagnostic
LEDs, network and port status can be
easily monitoring and trouble-shooting.
GS-5124C also build in wiring crossover on
all ports allows connection to server or PC
without worrying about cabling.
GS-5124C
RUB
TECHTECH
Unmanaged Switch
Technical SpecificationsTechnical Specifications
Standard compliance:
IEEE 802.3 10Base-T Ethernet(twisted-pair copper)
IEEE 802.3u 100Base-TX Ethernet(twisted-pair copper)
IEEE 802.3ab 1000Base-T Ethernet(twisted-pair copper)
IEEE 802.3Z 1000Base-T Ethernet(Gigabit Fiber)
ANSI/IEEE 802.3 Auto-negotiation
MAC Address: 8K
Network Interface: 24 10/100/1000Mbps RJ-45 ports
Flow control:
IEEE802.3x compliant for full-duplex
Back pressure flow control for half-duplex
Media:
10BASE-T: UTP Cat. 3, 4, 5 or up
100BASE-TX: UTP Cat. 5 or up
1000BASE-T: UTP Cat. 5 or up
Transmission Mode: 10/100Mbps, full/half-duplex (Auto-sensing)
Transfer Rate:
10Mbps: 14880pps (64 Bytes Package)
100Mbps: 148800pps (64 Bytes Package)
1000Mbps: 1488000pps (64 Bytes Package)
Buffer Memory: 400KB on chip frame buffer
Switching Method: Store & forward
LED Description
LED Color Function
Global POWER Green Lit when +5V power is coming up
Global CPU/ Green Blinks when CPU is activity
ACT
Port LINK/ Green Lit when connection with remote device
1-24 ACT is good
Blinks when any traffic is present
Port 1000/ Green/ Lit Green when TP link on 1000Mbps
1-24 100Mbps Amber speed
Lit Amber when TP link on 100Mbps
speed
Off when 10Mbps or no link occur
Gigabit Switch
Gigabit Switch