Filter
Top Products
24 MediaFlex 2900 Multimedia Access Point User’s Guide 8000001, December 2005
Configuring the MF2900 AP
Configuring the MF2900 AP
This section describes the tasks and screens used to customize the MF2900 AP configuration to run on your
wireless network.
Review the following topics before you change any system configuration settings:
• "Connecting to the MF2900 AP" on page 15
• "Accessing the Web Interface" on page 17.
System Configuration
Table 6, “M2900 AP Default and User Settings Worksheet,” on page 21 shows the default settings used to
login to the device.
A minimum set of configurations is required to put the MF2900 AP into operational mode. The system
provides the default settings for these configuration items. You should change the default settings where
necessary to match your own wireless network’s configuration, and to protect your privacy.
A system reboot is required for configuration changes to take effect. Follow the following steps to configure
the MF2900 AP:
1. Connect to the M2501 adapter by following the instructions in "Connecting to the MF2900 AP" on page 15.
2. Choose Configuration->System.. The window of Figure 5 appears.
Figure 5—System Configuration
3. Enter your configuration changes in the appropriate fields.