Samsung 5400 Fax Machine User Manual


 
50
Handbook
|
The Error Correction Mode (ECM) function may help
your fax machine improve communication in areas where
telephone line conditions are marginal. Refer to the
“Problem Solving” section of this handbook for other
suggestions if you have communication problems.
Available settings are ON (default) and OFF.
21 REMOTE DIAGNOSIS
The remote diagnostics feature allows a service person
remotely to dial and service your fax machine.
Available settings are ON and OFF (default).
22 PC/FAX SWITCH
This function is active only when the Multifunction
Printer Option is installed and your fax machine is set to
the PC Fax answering mode. In that case, incoming faxes
are saved directly to the PC’s disk without being printed.
If the PC is turned off or not functioning, the fax machine
acts as a stand-alone fax machine and prints incoming
faxes when this PC/FAX SWITCH function is set to ON
(default). If this function is set to OFF, the fax machine
will not accept incoming faxes when the PC is turned off
or not functioning.
23 ONE TOUCH PARAM
This function allows you to activate the Echo Protection
feature for a specific One Touch key, without changing the
normal settings. Echo Protection can improve
communication with a location in a noisy telephone area.
For instructions on changing One Touch Parameters
settings for a One Touch key, refer to the “Programming
Your Speed Dial directory, One Touch Faxing” section of
this handbook.
Changing Your User Function Settings
1 Press the Select Function key.
2 Press the 9/User Program One Touch key.
The display shows
1:FUNC. PROGRAMMING.
3 Press the Yes key. The display shows
FUNCTION NO. [ ].