Filter
Top Products
|
Handbook 89
Delete
Refer to Steps 1 through 6, above.
To delete a previously added One Touch location,
• Press the One Touch key.
• Press No ᮣ to delete it from the group.
To delete a previously added Auto Dial location,
• Press the Auto Dial key.
• Enter the 2-digit location Auto Dial number.
• Press No ᮣ to delete it from the group.
7 After you have completed your selection by pressing
Yes ᮤ or No ᮣ, the display shows
SELECT LOC.
Continue to add or delete locations from your group.
8 When you are finished programming your group, press
the No ᮣ key.
The display shows
LOCATION PROGRAMMING.
9 To program another group, go back to Step 3. If you are
finished, press the Select Function key.
Sending to a Group
!
These instructions assume that you have the default
setting for User Function 18 (FEEDER) engaged. If you
have the MEMORY setting engaged, skip step 4.
1 Load your document(s).
2 Press the Select Function key.
3 Press the 2/BROADCAST ↔ FEEEDER TX One Touch
key.
The display shows FEEDER TX.
4 Press No ᮣ.
5 Press the # key, then the two-digit number (01-20) for the
group.
6 Press No ᮣ twice.
7 Press the Start key.
The fax unit scans the document(s) into memory and begins
transmitting the message.