Open as PDF
Installing Printer Software in Windows
2.Configure an IP address, subnet mask, and gateway for the
printer manually and click
to set the specific IP
address for the network printer.
, and go to step to step 6.
• You can also set the network printer via SyncThru
Service, an embedded web server. Click
Set IP Address
window. Your machine’s embedded website
The list of printers available on the network appears.
Select the printer you want to install from the list and then
• If you do not see your printer on the list, click
refresh the list, or select
Add TCP/IP Port
to add your
printer to the network. To add the printer to the
network, enter the port name and the IP address for the
To verify your printer’s IP address or the MAC address,
print a Network Configuration page.
• To find a shared network printer (UNC Path), select
Shared Printer [UNC]
and enter the shared name
manually or find a shared printer by clicking the
: If you cannot find your machine in network, please turn
off the firewall and click
For Windows operating system,
start windows firewall, and set this option unactivated. For
other operating system, refer to its on-line guide.
After the installation is finished, a window appears asking
you to print a test page and to register yourself as a user
of Samsung Printers in order to receive information from
Samsung. If you so desire, select the corresponding
checkbox(es) and click
Otherwise, just click
: After setup is complete, if your printer driver doesn’t
work properly, reinstall the printer driver. See “Reinstalling
Printer Software” on page 10.
You can choose individual components to install and set a
specific IP address.
Make sure that the printer is connected to your network
and powered on. For details about connecting to the
network, see the supplied printer’s User’s Guide.
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
If the installation window does not appear, click
, replacing “
” with the
letter which represents your drive and click
If you use Windows Vista, click
, and type
window appears in Windows Vista, click
Install or run program
User Account Control