Open as PDF
Using Your Printer in Linux
Using SetIP program
This program is for the network IP setting using the MAC
address which is the hardware serial number of the network
printer card or interface. Especially, it is for the network
administrator to set several network IPs at the same time.
You can only use SetIP program when your machine is
connected to a network.
SetIP program should be automatically installed during the
printer driver installation.
Starting the program
Print the machine’s network information report which
includes your machine’s MAC address.
Double click the
in the SetIP window to open the TCP/IP
Enter the network card's MAC address, IP address, subnet
mask, default gateway, and then click
: when you enter the MAC address, enter it without
The machine prints the network information.
the settings are correct.
Close the SetIP program.
Using the Unified Driver
Unified Linux Driver Configurator is a tool primarily intended for
After installing the Unified Linux driver, the Unified Linux Driver
Configurator icon will automatically be created on your desktop.
Opening the Unified Driver
Unified Driver Configurator
You can also click the Startup Menu icon and select
Samsung Unified Driver
Press each button on the Modules pane to switch to the
corresponding configuration window.
You can use the onscreen help by clicking
After changing the configurations, click
to close the
Unified Driver Configurator.
Printers Configuration button
Ports Configuration button