Filter
Top Products
Desktop Class
Spinpoint F3
160GB 320GB 500GB 750GB 1TB
8MB HD164GJ HD324HJ
16MB HD163GJ HD323HJ HD502HJ
32MB HD754JJ HD103SJ
FEATURES
• MAX.500GB Formatted Capacity Per Disk • Environment friendly product with RoHS compliance
• Serial ATA 3.0Gbps Interface Support • Improved performance with dual-ARM based firmware
• Improved recording stability over temperature with PMR • ATA S.M.A.R.T. Compliant
• Advanced dynamic FOD control for best data integrity • ATA Automatic Acoustic Management Feature
• Intelligent compensation of external disturbance • ATA 48-bit Address Feature
• SATA Native Command Queuing Feature • ATA Device Configuration Overlay Feature
• Device Initiated SATA Power Management • NoiseGuard™
• Rotational vibration sensor(Optional) • SilentSeek™
Interface
Serial ATA 3.0Gbps
Temperature
Buffer DRAM Size
2
8 / 16 / 32 Operating 0 ~ 60 °C
Byte per Sector
512 bytes Non-operating -40 ~ 70 °C
Rotational Speed
7,200 RPM
Humidity (non-condensing)
Operating 5 ~ 90 %
Non-operating 5 ~ 95 %
Capacity
DRIVE CONFIGURATION
PERFORMANCE SPECIFICATIONS
250GB
HD253GJ
HD254GJ
Model
ENVIRONMENTAL SPECIFICATIONS
Average Seek time (typical)
8.9 ms
Linear Shock (1/2 sine pulse)
Average Latency
4.14 ms Operating (2.0ms) 70 G
Data Transfer Rate
Non-operating (2.0ms) 300 G
Media to/from Buffer (Max.) 250 MB/sec
Buffer to/from Host (Max.) 300 MB/sec
Altitude (relative to sea level)
160~500GB 750GB/1TB
Operating -300 to 3,000 m
Drive Ready Time (typical)
8 sec 11 sec Non-operating -300 to 12,000 m
Non-recoverable Read Error
1 sector in 10
15
bits
Height (Max.)
26.1 mm
Start/Stop Cycles
50,000
Width
101.5 mm
Length
147.0 mm
160~500GB 750GB/1TB
160~500GB 750GB/1TB Weight (Typ.)
475 g 625 g
Idle(Typ.)
2.5 Bel 2.7 Bel
Performance Seek (Typ.)
2.8 Bel 2.9 Bel
Voltage +5V±5%, +12V±10%
* Note : Design and specifications are subject to change without prior notice.
1.1MB = 1,000,000 Bytes, 1GB=1,000,000,000 Bytes
2. A small portion of the 8/16/32MB buffer memory is reserved for
firmware use
3 Average value with a high performance cover.
Spin-up Current (Max.) 2.0A 2.2A
4 Random seek with 30% duty cycle.(Average value)
Seek
(
t
yp
ical
)
4
5.4W 6.7W
Read/Write (typical) 5.8W 7.2W
Idle (typical) 4.8W 6.3W
Standby (typical) 1W 1W
Sleep (typical) 1W 1W
RELIABILITY SPECIFICATIONS PHYSICAL DIMENSION
POWER REQUIREMENTS
160~500GB
ACOUSTICS
3
750GB/1TB
Capacity
1
3.5" HDD product specification Rev 1.0
Match with product manual Rev 01