Filter
Top Products
ENG
SADT-100EC_1
Overview
The ceiling mount adaptor (SADT-100EC) is used for the smart dome
camera to be installed in a double ceiling of the concealed type.
Notice
• Select an installation spot which can endure more than 4 times of the product weight.
• Install the device in the spot where more than 200mm in space is provided above the
ceiling board.
• It can be installed only when the ceiling board is less than 40mm thick.
• Make sure to use a safety wire that can prevent falling.
• When you install the camera on the adaptor, be sure to use the fixing screw which is
provided with the adaptor.
Installation
1. Use template A to drill a hole in the ceiling.
Remove the circular shape (“C”) from the center of template A.
Place template A on the ceiling board where to install the ceiling mount adaptor and
drill a Ø219mm hole on it.
The shape of the hole is as follows.
Over 200mm
CEILING BOARD
Within 40mm
TEMPLATE A
CEILING B/D
Ø219 mm
Ø219
“C”
SADT-100EC_ENG.indd 1 2008-01-23 오후 4:14:37