Filter
Top Products
ENG
SADT-103WM_1
Overview
The Wall Mount Adapter is used to install the OUTDOOR
HOUSING (SHG-221/222) on the indoor/outside wall.
Notice
• Make sure that you must select an installation spot to endure the total weight of "Wall
Mount Adapter", "Outdoor Housing" and "Smart Dome Camera".
•
This product is designed to use with anchor bolts and anchor nuts (M10).
• If installing in a concrete wall, use a M10 anchor bolt (nut) with flat washer and spring
washer.
•
Each installed anchor bolt should endure 700kg of pulling force.
• Wall Mount Adapter can be installed directly in the wall, and also attached to CORNER
MOUNT ADAPTOR(SADT-110CM), or POLE MOUNT ADAPTOR(SADT-100PM). At this
time, please use the PG-13.5 cable grand.
Installation
1. Select an installation spot which can endure more than 4 times of the product weight.
2. Refer to the following wring diagram to prepare cables necessary for connecting the
Outdoor Housing.
SADT-103WM_ENG.indd 1 2008-03-18 오전 9:13:51