Filter
Top Products
6.2
Inserting a pause
With some private telephone systems, you must dial an access code (9, for example) and listen for a second dial
tone before dialling an outside number. In such cases, you need to insert a pause in the number when you are
registering Auto Dial such as a One-Touch or Speed Dial number.
If you are asked for the number when setting up Auto Dial, follow this procedure:
Press
Redial/Pause
to insert a pause while entering the number.
• A ‘P’ is inserted at the point where you pressed
Redial/Pause
. If you need a longer pause, press
Redial/Pause
as
many times you want.
Using Caller ID
The Caller ID system enables the receiver to view the numbers or names of callers. Once you have subscribed to
Caller ID services, your machine can display caller information. To switch the Caller ID feature on:
1
Press
Menu
repeatedly until
SETUP SYSTEM
appears, and press
OK
.
2
Select
Caller ID
by pressing
Left/right arrow
buttons, and press
OK
.
3
Choose the desired option, and press
OK
.
•
On
: Activates the Caller ID feature.
•
On /w Junk Fax
: Activates Caller ID and ignores any fax registered as a junk fax (see "Registering/deleting the junk fax
numbers" on page 6.5).
•
Off
: Deactivates the Caller ID feature.
N
OTE
: It depends on the country whether Caller ID system is supported or not.
Using the Mute
While talking on the phone via speaker phone or handset, you many want to mute your voice for secret.
To mute a call
Press
Mute
while speaking.
• The display shows
MUTE
to indicate it is activated.
To release the mute
Press
Mute
to resume conversation.