Filter
Top Products
-2-
Lens Replacement Procedure
While pressing the Lens release button on the top of
the cabinet, turn the lens counterclockwise until it
stops and pull it out slowly from the projector.
Be careful not to drop the lens.
Remove the Lens
1
2
Perform the steps 1-2 for lens replacement.
First set the lens at the center position with lens shift adjustment.
Fig-1-1
LENS RELEASE BUTTON
Fig-1-2
Fig-2
Red mark
(For A type Cabinet)
Mount the Lens
1. Remove the protective caps (front and back) on the lens.
2. Insert the lens into the Lens Bracket of the projector as
matching the red mark on the lens to that on the Lens
Bracket.
3. Slowly turn the lens clockwise until it clicks. Make sure that
the lens is fully inserted to the projector.