Sanyo PDG-DWT50L Projector User Manual


 
4500 ANSI LUMENS z TRUE WXGA z MULTIMEDIA PROJECTOR
Issued 11/07 © 2007 SANYO
PDG-DWT50L
WXGA Tabletop Multimedia Projector
A TABLETOP WITH WIDE RESOLUTION
Offering a wide XGA full (1280 x 768) projection, the PDG-DWT50L makes
it possible to project high-quality HD images from nearly any location. The
PDG-DWT50L, a DLP projector, with its combination of BrilliantColor™
and six-segment color wheel (optional), offers true color reproduction.
(The contrast ratio is a high 2100:1 with DynamicBlack™.)
NETWORK CONTROL / ADMINISTRATION
SANYO’s standard RJ45 LAN feature allows for control and administration
of a projector via a network. Projector status can be monitored and
projector functions can be controlled through a web browser. A notification
can be automatically sent via e-mail whenever the projector encounters a
problem, allowing the administrator to act quickly to resolve any issues.
HELPFUL MAINTENANCE FUNTIONS
The lamp and filter maintenance functions assist in the proper
maintenance of the PDG-DWT50L projector. Easy maintenance access is
provided for lamp and color wheel replacement.
EASY POWER OFF AND ON START
The Easy Power Off function allows the projector to be turned off (even
when projecting an image) using a power strip equipped with a switch and
a breaker. The On Start function allows the projector to be turned on by
supplied AC power.
DUAL LAMP CONTROL SYSTEM
The two-lamp total control system offers high brightness, improves lamp
life and energy savings, along with redundancy. The power management
function shuts the PDG-DWT50L off when input is not detected and helps
maintain lamp life.
BAYONET-STYLE EASY LENS REPLACEMENT
The easy lens attachment (included) makes installation and removal of the
optional lenses quick and easy by a one-touch release button.
DLP® and the DLP logo are registered
trademarks of Texas Instruments.
BrilliantColor™and DynamicBlack™ are
trademarks of Texas Instruments.
Specifications
Resolution
WXGA (1280
x 768)
Brightness (typical)
4500
A
NSI Lumens
Uniformity
85%(Center to Corner)
DMD
Panel System
0.65” Single DLP
®
Chip
Number of Pixels
983,040
Contrast Ratio
2100:1 (with DynamicBlack™
)
Projection Image (diagonal)
40”-500” (Dependent on Lens)
A
spect Ratio
15:9
Throw Distance
Dependent on Lens
Zoom/Focus
Dependent on Lens
Power Lens Shift
Up/Down Ratio 1:1
5:-1
Left/Right Ratio 2:3 – 3:2 (Dependent on Lens)
Digital Keystone Correction
Vert. +/- 40°MAX, Horiz. +/- 35°MAX
Projection Lens
Optional
Lens Throw Ratio
Dependent on Lens
Projection Lamp
260W UHP x 2
Scanning Frequency
H 15kHz, 31-90kHz;
V 50-85Hz
Dot Clock
170 MHz
Color System
PAL/PAL-M/PAL-N/SECAM/NTSC4.43/NTSC
Computer Compatibility
UXGA, SXGA+,SXGA, WXGA, XGA, SVGA, VGA,
MAC
Sound Output
Two-piece stereo 3W
V
oltage
100-240V AC; 50/60/Hz (auto sense/select)
BTU Rating
2354.36(Dual lamp mode )
dB Rating
34 dB(eco mode)
Power Consumption
690W
Dimensions (WxHxD)
19.9”x7.6”x 15.2”(not including
Protrusion & Lens)
Net Weight
36.4 lbs.(w/o Lens)
User Maintenance
Clean air filters, replace lamp assembly
Input Terminal Panel 1
D-Sub 15 x1 Audio x1 (stereo mini jack)
Input Terminal Panel 2
RGBHV or Y/Cb/Cr (BNC x5)
Audio x1 (stereo mini jack)
Input Terminal Panel 3
DVI-D x1(HDCP) Audio x1 (stereo mini jack)
Input Terminal Panel 4
Component Video (RCA x3)
L & R Audio (RCA x2)
Input Terminal Panel 5
Composite Video(RCA x1)
S-Video x1
L & R Audio (RCA x2)
A
dditional Input Terminals
Wired remote control jack x 1 (stereo mini jack)
USB x 1(typeB) RS232C Control Port x 1 (D-sub9pin)
RJ45 LAN Remote control 15pin GPIO
Screen trigger x 1
Output Terminals
D-Sub 15 x 1 Audio x1 (stereo mini-jack)
Included Accessories
Wired/Wireless I/R Remote Control
VGA Cable
Batteries (two “AA”) AC power cord Wired remote
cable Lens cover Owner’s manual(CD-ROM & Quick
Reference Guide) Security Sticker
Optional Accessories
Replacement Lamp (610 335 8406)
Replacement Remote (645 095 1992)
Optional Lenses (see below)
Optional 6 segment Color Wheel POA-CW01
Warranty
Three years parts and labor; 90 days lamp;
Quick Repair Program under warranty
Because its products are subject to continuous improvement, SANYO reserves the right to
modify product design and specifications without notice and without incurring any obligations.
Optional Lens Specifications
On-Axis
Short
Fixed
Short
Zoom
STD
Zoom
Long
Zoom
Ultra Long
Zoom
Part No. LNS-W41 LNS-W40 LNS-S40 LNS-T40 LNS-T41
Zoom No Power Power Power Power
Throw
Ratio
0.77:1 1.33-
1.79:1
1.78-
2.35:1
2.22-
4.43:1
4.43-8.3:1
F Stop 2.0 1.8-2.3 1.7-1.9 2.1-2.9 2.2-3.1
Length 5.2” 6.42” 5.43” 6.65” 6.06”
Weight 2.2lbs 2.4lbs 1.8lbs 2.6lbs 2.0lbs
21605 Plummer Street
Chatsworth, CA 91311
Ph: 888-337-1215 (toll-free)
Fax 818.717.2719
www.san
y
opro
j
ectors.com
PRESENTATION TECHNOLOGIES
Lens sold separately