Filter
Top Products
LOADING LABELS, TAGS AND RIBBON CL408 and CL412
LOADING LABELS AND TAGS
1. Open the Top Access Door by
swinging it up and to the left. Open
the Front Access Door by pushing
down on the green Front Cover Latch
and swinging the door forward and to
the left. This gives access to the print
mechanism on three sides
Note: The Top Access Door must be
open before the Front Access Door
can be opened.
2. Open the Print Head Assembly by
rotating the green Head Latch
counter clockwise. The head is spring
loaded and will automatically raise to
the opened position
3. Push the Label Supply Guide to the
outside of the printer to give the
maximum label width.
4. Clear access is provided to the label path
by pulling the top of the Outside
Label Guide down.
5. If using roll labels (or tags), load the roll
onto the Label Supply Spindle so
that the printing side of the labels faces
upwards as it unwinds from the roll.
Push the roll all the way to the inside of
the printer, raise the Label Supply
Guide and adjust its position until it
fits snugly against the outside of the
label roll.
Front Access
Door Latch
Top Access
Door
Front Access
Door
Head Latch
Feed Slot
Label Supply
Guide
Outside Label Guide
Label Supply
Spindle
Outside Label
Guide
Section 2. Installation and Configuration
Page 2-89001035 Rev. ESATOCL SeriesPrinters