Filter
Top Products
Characters, Custom-Designed
Command Structure Store Command: <ESC>Tabcc
Recall Command: <ESC>Kab90cc
a = 1 16x16 matrix
2 24x24 matrix
b = Specifies the character encoding method for the data
stream
H Hexadecimal characters
B Binary characters
cc = Memory location to store/recall the character. Valid
memory locations are 21 to 52 (counting in Hex) or “!” to
“R” in Binary
(data) = Data to describe the character
Example: <ESC>T1H3F
<ESC>K1H903F
Placement: The Store command is typically sent in its own data
stream to the printer, between the Start/Stop
commands.
The Recall command is sent in a secondary data
stream to print the character,and follows any necessary
position or size commands.
Default: None
Command Function To allow for the creation, storage, and printing of custom characters,
such as special fonts or logos. Up to 50 individual characters may be
stored in the custom character volatile memory.
Printer Input
Page 21 PN 9001092 Rev. A SATO CX208/212 Printers
CX208/212 Programming Guide