Filter
Top Products
Special Notes 1. This command is provided for compatibility with other SATO
printers. It is not recommended for new label designs and the
<ESC>% rotate command should be used.
2. Do not combine this command and the <ESC>% rotate command
in the same data stream.
3. A custom graphic is not affected by this command. Therefore,
always design and locate your graphic image to print in the
appropriate orientation.
4. See Rotated Fields, for more information.
5. The specified values are valid until another Rotate (<ESC>R)
command is received.
6. Receipt of a Stop Print (<ESC>Z) command will reset the setting
to the default value.
Page 66 PN 9001092 Rev. A SATO CX208/212 Printers
CX208/212 Programming Guide