SATO CX208/212 Printer User Manual


 
Expanded Memory Function
Initialize
Command Structure <ESC>BJFaaaaaaaa
aaaaaaa = Eight character alphanumeric user ID
Example: <ESC>BJFsato
Placement: Immediately following the <ESC>CC Memory Area
Select command.
Default: None
Command Function This clears all of the data from the specified Memory Area and
prepares the area to accept data.
Input to Printer
Printer Output There is no printer output as a result of this command.
Special Notes 1. You must have the optional Expanded Memory to use this
command. Call your local SATO representative for information.
2. All Expanded Memory must be initialized before they can be used
for the first time.
3. Care should be exercised when using this command as it destroys
any data previously written the specified section of memory. It will
clear all data from the Expanded Memory and assign the new ID
(“sato” in the above example).
Page 79 PN 9001092 Rev. A SATO CX208/212 Printers
CX208/212 Programming Guide