Seagate PS 110 Computer Drive User Manual


 
Seagate Technology LLC
920 Disc Drive
Scotts Valley, CA
95066 U.S.A.
PN: 100566489B 05/09
WWW.SEAGATE.COM
Visit us at our Support pages for assistance with
• Installation:
Additional instructions and troubleshooting assistance
• Knowledge Base: FAQ’s, How to use this product
• Download Center: Installation software, utilities, and diagnostics
• Warranty Information
And all of your other storage needs
A soft copy of your comprehensive User Guide is included with your product.
To contact Support, visit us at our Contact Us page.
?
Quick Start Guide
Thanks For Purchasing a BlackArmor
®
PS 110 Portable Storage and Backup System
YEAR
LIMITED
WARRANTY
5
© 2009 Seagate Technology LLC. All rights reserved. Seagate, Seagate Technology, the Wave logo, and BlackArmor are trademarks or registered trademarks of
Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or registered trademarks are the
property of their respective owners. When referring to hard drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one
thousand billion bytes. Your computer’s operating system may use a different standard of measurement and report a lower capacity. In addition, some of the
listed capacity is used for formatting and other functions and will not be available for data storage. Seagate reserves the right to change, without notice, product
offerings or specifications.
Kit Contents
Sold Separately
Connect
Install
Optional
Portable Storage and Backup System
After drive is connected, software
installer automatically launches.
Follow the on-screen instructions.
RECOMMENDED: Create Recovery CD
Be sure to create a system recovery CD
using BlackArmor Backup Software.
Your system and data can be restored
using this CD. See the BlackArmor
®
Backup
User Guide for instructions.
When disconnecting the drive, ensure that
you use the safely remove hardware feature.
Right-click this icon in the notification area
and then follow the instructions.
USB Cable
Seagate BlackArmor PS 110 Drive
FCC DECLARATION OF CONFORMANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
CLASS B
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications made to this equipment may void the user’s authority to operate
this equipment.
PMS 299C
Black
Docking Station
Optional dock not included.
Ask your retailer or visit www.seagate.com.
If the installation does not begin automatically,
launch it manually by clicking Start and then
Run.Type e:\setup.exe when the Run dialog
box displays (where “e” is the drive letter of
your BlackArmor PS 110 drive).