Filter
Top Products
Pipeline HD.2 Series SATA Product Manual, Rev. E 7
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and
power to operational levels.
Operational Shock (max.) 70 Gs at 2ms
Non-Operational Shock (max.) 350 Gs at 2ms
Vibration, operating 5Hz to 350Hz: 0.50 Gs
350Hz to 500Hz: 0.25 Gs
Vibration, non-operating 5Hz to 350 Hz: 5.0 Gs
350Hz to 500Hz: 1.0 Gs
Drive acoustics, sound power
Idle** 1.9 bels (typical)
2.1 bels (max.)
CE Seek Profile 2.3 bels (typical)
2.4 bels (max.)
Nonrecoverable read errors 1 per 10
15
bits read
Annualized Failure Rate (AFR) 0.55%
Warranty To determine the warranty for a specific drive, use a web browser to access the following web
page:
support.seagate.com/customer/warranty_validation.jsp
From this page, click on the “Verify Your Warranty” link. You will be asked to provide the drive
serial number, model number (or part number) and country of purchase. The system will dis
-
play the warranty information for your drive.
Contact start-stop cycles 50,000 at 25°C, 50% rel. humidity
Supports Hotplug operation per the
Serial ATA Revision 2.6 specification
Yes
Drive specification ST3500414CS ST3500312CS ST3320413CS ST3320310CS