Filter
Top Products
2 Hawk 2XL Family Installation Guide, Rev. C
_______________________________________________________________________________________________________________________
The physical design characteristics of the drive models de-
scribed herein, serve to minimize EMI radiation when installed
in an enclosure that provides reasonable shielding. As such, the
drive(s) are capable of meeting the Class B limits of the FCC
Rules and the Regulations of the Canadian Department of
Communications.
Note. It is the end users' responsibility to assure that the drive
models described herein meet the appropriate EMI re-
quirements of their system. Shielded I/O cables may be
required if the enclosure does not provide adequate
shielding. If I/O cables are external to the enclosure,
shielded cables should be used, with the shields grounded
to the enclosure or to the host controller, but not both.
The equipment is designed to provide reasonable protection
against such interference in a residential installation. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause interference
to radio or television, which can be determined by turning the
equipment on and off, you are encouraged to try one or more of
the following corrective measures:
• Reorient the receiving antenna.
• Move the device to one side or the other of the radio or TV.
• Plug the computer into a different AC power outlet so that the
receiver and computer are on different branch outlets. That is,
circuits controlled by different circuit breakers.
If necessary you should consult your dealer or an experienced
radio/television technician for additional suggestions.