Sharp AR-M276 All in One Printer User Manual


 
34
INTERRUPTING A COPY RUN
A copy run can be temporarily interrupted to allow another copy job to be performed. When the other job is finished,
the copy run will resume using the original copy settings.
1
Press the [INTERRUPT] key ( ) to
interrupt the copy run.
The [INTERRUPT] key
( ) blinks until the
machine is ready for the
interrupt job, after which
it lights steadily.
If you decide to cancel the
interrupt job while selecting
settings, press the
[INTERRUPT] key ( ).
2
Remove the previous original(s) and
place the original(s) of the interrupt
copy job. (p.22, p.23)
3
Select the number of copies and any
other desired copy settings, and then
press the [START] key ( ).
The interrupt copies will
be offset from the
previous copies. (Offset
function, p.35)
4
When the copy job is finished, press
the [INTERRUPT] key ( ) and remove
the original(s).
5
Replace the previous original(s) and
press the [START] key ( ) to resume
copying.
Replace only the originals that have not yet been
scanned.
Automatic two-sided copying, sort/group copying, staple sort, cover copy, pamphlet copy, mixed feeding, job
build, job programs, or multi shot copying cannot be used for interrupt copying.
Note
If audit mode is enabled, a message will
appear prompting you to enter your
account number. Enter your account
number with the numeric keys. The copies
that you make will be added to your
accounts count.
If an original is being scanned when the
[INTERRUPT] key ( ) is pressed, the
interrupt job will begin after the original is
scanned. If a copy is being printed, the
interrupt job will begin after the copy is
printed.
Note
ACC.#-C