Sharp AR-153E N Copier User Manual


 
4
This chapter provides basic information for using the unit.
USING THE MANUAL
The operation manual contains explanations of how to operate the unit, important
considerations, and maintenance procedures. To get the most out of the unit, please
read the operation manual. Please keep the operation manuals in a suitable location
that will allow for convenient future reference.
Conventions used in the manual
This operation manual explains the operation of the AR-series models. In cases
where the operation is the same, AR-153EN is used. The differences between AR-
122EN/AR-152EN and AR-153EN are shown below.
Some models may not be available in some countries.
This operation manual refers to the Single Pass Feeder as the "SPF".
In this manual, the following icons are used to provide the user with information
pertinent to the use of the unit.
Warns the user that injury may result if the contents of the warning
are not properly followed.
Cautions the user that damage to the unit or one of its components
may result if the contents of the caution are not properly followed.
Notes provide information relevant to the unit regarding
specifications, functions, performance, operation and such, that
may be useful to the user.
Indicates a letter displayed in the display.
:Standard functions and equipment
:Optional functions and equipment
AR-153EN
Copier with multi-bypass
Printer *
1
(AL-12PKM)
AR-122EN/AR-152EN
Copier with single bypass
Scanner *
1
(AL-12PKM)
*
1
Can be used when the optional Printer/Scanner Expansion Kit (AL-12PKM) is installed.
*
2
The optional single pass feeder (AR-SP5) can be installed.
*
3
The optional 250-sheet paper feed unit (AR-D16) can be installed.
Printer *
1
(AL-12PKM)
Scanner *
1
(AL-12PKM)
SPF *
2
(AR-SP5)
250-sheet paper feed unit *
3
(AR-D16)
1
INTRODUCTION