Sharp AR-C160 Copier User Manual


 
32
Auto Color Calibration
The Auto Color Calibration program enables automatic color
gradation correction when it becomes misadjusted.
NOTE:
The color gradation may not be sufficiently corrected after one correction
cycle. If so, a re-execution of the program may be necessary.
This program can be selected by pressing the “AUTO COLOR
CALIBRATION” key on the category menu screen.
1. Select the “AUTO COLOR CALIBRATION” key on the
category menu screen.
The following display will appear.
2. Press the “EXECUTE” key.
The copier will print the test patch.
3. After the test patch is printed, place it on the document
glass of the copier with 5 white sheets of the same size
on top of it and press the “EXECUTE” key again.
Place the test patch on the document glass as shown in the
illustration.
The copier will start scanning the test patch on the document
glass and the adjustment will automatically be made.
4. Press the “OK” key to exit the program.
To re-execute the calibration, repeat all the steps.
KEY OPERATOR PROGRAMS
KEY OPERATOR PROGRAMS
COPIER MODE
AUTO COLOR CALIBRATION
OTHER FUNCTION
SETTINGS
TIMER SETTING
ENABLE/DISABLE
SETTINGS
ACCOUNT CONTROL
OK
KEY OPERATOR PROGRAMS
AUTO COLOR CALIBRATION
EXECUTE
USE 11" 17" PAPER FOR THIS ADJUSTMENT.
PRESS [EXECUTE] TO PRINT THE TEST PATCH.
OK
BLACK
Place the test patch as shown.