Sharp AR-M350N/M450N Printer User Manual


 
AR-M350U UNPACKING AND INSTALLATION 6-3
<6>Connect the cables to the control PWB.
Connect all the cables that have been removed in <2> to the original
positions of the control PWB unit.
If another peripheral device must be installed, carry out the
following steps at the end of the installation work.
2) Turn on the main switch of the main unit of the printer.
Insert the power plug of the main unit of the printer to the outlet.
Then, turn the main switch located on the front side of the main unit to
the "ON" position.
If the machine is equipped with a facsimile unit, turn on the FAX power
switch.
3) Prepare to enable the printer expansion function.
To enable the printer expansion function, use the keys on the operation
panel to enter the product key.
For entry of the product key, see the key operator's guide of the operation
manual for the main unit.
Carry out the network setting for the Print Server Card.
Use a key operator program to carry out the network setting for this
machine. For this network setting, the customer's network environment
must be checked. Consult the network administrator to carry out the
setting.
In addition to the network setting for this machine, to use the
machine in the network environment:
According to the customer's network environment, install the driver
software from the CD-ROM supplied with this machine and use the utility
software supplied with the Print Server Card to set the network printer for
the server computer.
For installation in the server computer and network setting, see the
operation manual supplied with the main unit.
This setting must be carried out by the network administrator or based on
consultation with the network administrator.
4) To check the operation of the printer expansion function.
When the network settings and the driver settings are complete, perform
a test print to check if printing can be performed successfully.
(When test printing is completed successfully, use the "list print" key
operator program to print the network settings and keep the printout for
future reference.)
Installation of AR-P14 is now complete.