Sharp AR-M350U/M450U Printer User Manual


 
AR-M350U MAINTENANCE 7-1
[7] MAINTENANCE
1. Self print of set values
Use SIM 22-6 to print the set values (machine settings) and jam history.
These values must be printed before execution of maintenance or disassembly procedures.
2. Maintenance System Table
The maintenance system table is the same as that of the AR-M350/M450.
A. Scanner / DSPF
Maintenance cycle : 50K
Note 2: Replacement reference: Same as above or 2 years.
Check (Clean, replace, or adjust as necessary.) Clean Replace Adjust Lubricate Move position
Unit name Part name
When
calling
50K 100K 150K 200K 250K 300K 350K 400K Remark
Optical section Mirror/Lens/Reflector/Sensors
Table glass/OC
White reference glass
Rails
Drive belt/Drive wire/Pulley
DSPF Paper feed section Take-up roller Note 2
Separation pad Note 2
Paper feed roller Note 2
Transport section PS roller
Exposure section
(Dust-proof glass)
Paper exit section Paper feed roller SPF
Other Sensors For cleaning, blow air.
Finish stamp section
[Option]
(Japan only)
Stamp solenoid
Stamp individual part User replacement
at 10K or 1 year.