Sharp AR-P350 Printer User Manual


 
6-9
6
KEY OPERATOR PROGRAMS
Operation panel settings
Auto clear setting
[When using the operation panel on the main unit:]
The machine will activate the auto clear function and
return to the standby mode or the job status mode
when a programmed length has elapsed without any
operation on a setting screen. (When the printer is in
the mode of the condition settings, custom setting
or key operator programs, the auto clear function
will not operate.)
The auto clear time can be set to 15 seconds, 30
seconds, 60 seconds or off.
[When using the operation panel with touch panel:]
When a programmed length has elapsed without any
operation after a copy job is complete or while
detailed information concerning the current job and
reserved jobs or completed jobs is displayed, the
machine will activate the auto clear function and
return to the copy basic screen or the job status
screen. The auto clear time can be set in 10 second
increments up to 240 seconds. The auto clear function
can be disabled. (Even if this function is disabled,
however, the setting will not be applied to the fax
mode.)
Message display time
This program is used to adjust the time that
messages are displayed (for messages that
automatically disappear).
[When using the operation panel on the main unit:]
The time can be set to 3 seconds, 6 seconds, 9
seconds or 12 seconds.
[When using the operation panel with touch panel:]
The time can be set in 1 second increments up to
12 seconds.
Language setting
This program is used to switch the language of
messages displayed on the operation panel. The
following languages can be selected.
English, French, and Spanish
{Beep setting}
This program can be used only if the operation panel
with touch panel is used.
Use this program to enable or disable the alarm beeps
in the following cases. The alarm beeps are enabled
in the default setting.
Key touch, completion of original scanning, facsimile
reception, and communication error
Two levels of volume can be set.
{Disabling of job priority operation}
This program can be used only if the operation panel
with touch panel is used.
Use to disable priority job reservation to execute a
job after the current job (print, copy or facsimile
reception job).