Sharp DM-3551 Printer User Manual


 
4-2
TRANSMISSION BETWEEN MACHINES
SUPPORTING F-CODES
This machine supports the "F-code" standard as established by the ITU-T*.
The F-code standard makes it possible to perform special operations such as relay broadcast and confidential
transmission, which previously could only be performed with another similar Sharp machine, with any other machine
that also supports F-codes.
Before using any of the functions explained in this chapter, verify that the other fax machine supports F-codes and the
function that you wish to use (the other machine may use a different name for the function).
*The ITU-T is a United Nations organization that establishes communications standards. It is a department of the International
Telecommunication Union (ITU), which coordinates global telecommunications networks and services.
MEMORY BOXES AND SUB-ADDRESSES/PASSCODES
REQUIRED FOR F-CODE TRANSMISSION
Fax machines that support F-code transmission enable the creation of a "memory box" in the unit's memory. The
memory box is used to store documents received from another fax machine or documents to be sent when another
machine polls that machine. Up to 100 memory boxes can be created for a variety of purposes, and a name can be
assigned to each box. A "sub-address" that indicates the box's location in memory must be programmed, and if
desired, a passcode can also be programmed to control access to the box.
0001
SHARP
11245
Document
Group 1
7732123
3321 1115
7732123
7732123
Product Planning
Dept.
1115
Product
Planning
Dept.
3333
Department
Manager
11111111
4444
Public Box*
123456
010
Section
Manager
Reports
MEMORY
Sub-address (location in memory)
Select any number up to 20 digits.
Box name (used to manage
boxes in your machine)
Select a name of up to 18
characters.
Passcode (key)
Select any number up to 20 digits.
(Not required)
1115
Product Planning
Dept.
*The Public Box is used for normal serial polling (page 3-5).
When communication occurs involving a memory box, the communication will only take place if the sub-address and
passcode that the other machine sends match the sub-address and passcode programmed in your machine for that
box. Therefore, to allow communication, you must inform the other party of the sub-address and passcode of the
memory box. Likewise, to send a document to a memory box in another machine or use polling to retrieve a document
from that memory box, you must know the sub-address and passcode of that memory box.
Memory boxes are managed in this machine not only by sub-addresses and passcodes (which are number sequences), but
also by names. For example, for the memory box with the sub-address, "7732123", and the passcode, "1115", you could
assign the name "Product Planning". Assigning names makes it easier to manage memory boxes. (Note that you do not need
to inform the other party of a memory box name; the other party only needs to know the sub-address and passcode.)
This machine uses the term "sub-address" for the location of the memory box and the term "passcode" for the
password that allows communication; however, other fax machines of other manufacturers may use different terms.
When asking the other party for a sub-address and passcode, you may find it useful to refer to the 3-character
alphabetical terminology used by the ITU-T.
This machine ITU-T
F-code polling memory box F-code Confidential box
F-code Relay Broadcast Function
Sub-address SEP SUB SUB
Passcode PWD SID SID