Filter
Top Products
12
Copying from the document glass
When copying originals which cannot be fed from the automatic document feeder such as thick originals, open the
document cover and copy the originals from the document glass
■■
■■
■ 1-sided copies of 1-sided originals
1
Set an original on the document glass. (page 7)
Original size detector
●
Set an original by aligning its corner with the tip of the
scale (
) mark at the left rear corner of the glass as shown
in the illustrations.
2
Ensure that the 1-sided to 1-sided copy mode is
selected.
ORIGINAL
8
1
2
/
11
x
8
1
2
/
11
x
8
1
2
/
11
x
11 17
x
8
1
2
/
11
x
8
1
2
/
11
x
R
1.
2.
3.
4.
The one-sided to one-
sided mode is selected
when no icon for a two-
sided mode appears in the
dashed area on the display.
If the 1-sided to 1-sided
copy mode is already
selected, steps 3 to 5 are
not needed.
3
Ensure that paper of the same size as the original
is automatically selected. (✼Note)
COPY RATIO
AUTO
PAPER SELECT
100%
8
1
2
/
11
X
The selected tray will be
highlighted or the message
“LOAD xxxxxx PAPER.” will
appear. If the message
appears, load paper in a
paper tray or the bypass tray
with paper of the required
size. Even if the message
above is displayed,
copying can be performed
onto the currently selected
paper.
(✼Note) The following conditions must be satisfied.
●
Originals of a standard size (11" x 17", 8-1/2" x 14", 8-1/2"
x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2", A3, B4, A4, A4R or A5)
are set and the auto paper select function is enabled.
TRANSPA
8
1
2
/
11
X
8
1
2
/
11
X
11 17
x
1.
2.
3.
PLAIN
PLAIN
If originals of a size other
than the sizes above are to
be copied, manually select
the desired paper size.
Original Copy
NORMAL COPYING
or B4
Original scale
mark
Original scale
mark
8
1
2
/
x
11 or A4
8
1
2
/
x
11R or A4R
8
1
2
/
x
14
11x17 or A3
or B4
5
1
2
/
8
1
2
/
x
or A5
copy-1_Ep.P65 5/16/01, 3:19 PM12