Filter
Top Products
0-2
Moving this machine
Lift this machine at the positions shown in the illustration below and carry it horizontally.
CAUTION
Two people are required to lift and carry this machine.
The center of gravity of the machine is slightly to the left of the center of the machine when viewed from the front. If a
duplex module is installed the center of gravity will be even further shifted to the left. When lifting the machine be
careful to steady it to prevent it from toppling. Also be sure that all covers and the duplex module are securely closed
and latched before lifting.
If a duplex module is installed, do not lift the machine by the module as it may come off causing it and the machine
to drop.
Remove the multi purpose drawer and lift at the positions shown in the illustration.
For removal and installation of the multi purpose drawer, see page 4-4. To avoid injury be sure to completely remove the
multi purpose drawer.
Front side Rear side
If the machine has been placed on a stand/paper drawer:
The stand/paper drawer is on casters for moving. Unlock the adjusters of the stand/paper drawer and gently move the
machine taking care to steady it to prevent it from toppling.
For locking and unlocking the adjusters, see page 0-3.
CAUTION
The center of gravity of this machine is a little deviated to the left from the center. If the machine is not equipped with
a multi purpose drawer or a stand/paper drawer, take care in opening the left side cover (or the duplex module) not
to cause toppling of the machine.
Remove the multi
purpose drawer
in advance.
INSTALLATION REQUIREMENTS