Filter
Top Products
1-3
1
MAIN FEATURES
Laser printer able to accept a range of peripherals allowing it to be configured to specific needs
This product is a laser printer that can be used as a local printer which can be configured by the addition of
peripheral devices to extend its capabilities to include copier, network printer, network scanner or facsimile features.
A range of optional units to enhance productivity
Optional additions such as duplex units for producing two-sided output, additional paper feed units to increase the
variety of available paper sizes and paper capacity, paper output units to sort and otherwise organize the output
and a scanner module for automatically scanning documents.
600 dpi high resolution printing
High-definition and high quality printing with 600 dpi resolution can be performed. Also high image quality equivalent
to 1200 dpi can be output by using a smoothing function.
High speed monochrome printing
Depending upon the model chosen, high speed printing at 35 letter (A4) size pages/minute or 45 letter (A4) size
pages/minute is available.
PostScript compatible
Installation of a PS3 expansion kit gives PostScript compatibility (PostScript level 3).
Energy saving features
This product has the following two power reducing modes that conform to the
Energy Star guidelines which help to conserve natural resources and reduce
environmental pollution.
Preheat mode
The preheat mode is the first level of power reduction. The power is reduced
to the fuser unit a preset time after the machine has completed a job and no
further machine operations have been made. The machine can recover to
the ready condition within a short period of time. The preset time to enter
the mode can be set by a key operator program.
Auto power shut-off mode
The auto power shut-off mode is the second level of power reduction. In this
mode power is shut off to the fusing unit and the touch panel. In this state
more energy is saved than in the preheat mode but the time to recover to
the ready condition will be longer. The preset time to enter this mode can be
set by a key operator program.
When this product is used as a printer, and either of the above modes is active, the mode will be deactivated
automatically by an incoming job and the machine will automatically warm up and start to print when it has
reached the ready temperature.
When this product is configured for multi-function operation, and either of the above modes is active, the mode
will be deactivated as above by either an incoming print job or received facsimile data. Either mode will also be
deactivated by any key operation on the operation panel or by the action of an original being placed for copying
or facsimile transmission.
As an
ENERGY STA R
®
Partner, SHARP has
determined that this
product meets the
ENERGY STAR
®
guidelines for energy
efficiency.